Merchandise Description
1. Sorts & Sequence
Sequence | Measurement | Kinds | Functions | |||||
H (Square) |
L (Sq.) |
W (Flange) |
High Torque | Scraper | High Dust Defend | Low Sound | ||
Heavy Load & Quieter | fifteen Sequence | ○ | ○ | ○ | ○ | |||
twenty Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
twenty five Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
thirty Sequence | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
35 Collection | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
Quieter | 35 Sequence | ○ | ○ | ○ | ○ | |||
forty five Series | ○ | ○ | ○ | ○ | ||||
fifty five Collection | ○ | ○ | ○ | ○ | ||||
General | 15 Collection | ○ | ○ | ○ | ||||
twenty Sequence | ○ | ○ | ○ | |||||
25 Series | ○ | ○ | ○ | |||||
30 Sequence | ○ | ○ | ○ |
two. Basic Data
SGS Linear Xihu (West Lake) Dis.way can be categorised into non-interchangeable and interchangeable types. The measurements are equivalent. The principal big difference is that the interchangeable blocks and rails can be freely exchanged. Because of dimensional management, the interchangeable sort linear guideway is a excellent decision for the consumer when rails do not require to be paired for an axis For higher precision grades contemplate ordering a matched, non-interchangeable, assembly of a block and rail.
The benefits of non-interchangeable kinds against interchangeable sorts:
1). Given that the blocks and the rails are made separately, they’re put in beneath the common standard. In this situation, the above unfastened or more than tighten is nonetheless existed even the customer installs the interchangeable linear guideway pursuing a advised set up method.
two). If the blocks and rails put in in our business, we will obtain extremely precise linear motion.
three). If the linear guideway is mounted by un-competent staffs, the balls are effortlessly taken off.
four). If accompanied with a ballscrew, pre-load prerequisite, and attain for ≤0.05mm precision, we advise to pick non-interchangeable linear guideway.
Grinding or Milling Height:
1). The tolerance of non-grinding: ±0.1mm(Standard Regular)
2). The tolerance following Grinding: ~.03mm(General Common)
Remarks: If accompanied with a ballscrew, pre-load requirement, and obtain for ≤0.05mm precision, we advise to grind or mill height.
3. Proportions for SGC ZT/ZQ Collection
3.1. ZTH/ZTL Substantial Rigidity
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block(mm) | Dimensions of Rail(mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C (KN) | |
ZTH15 | 28 | 3 | 9.5 | 34 | 26 | 26 | 39.two | fifty eight.2 | M4x5 | fifteen | 14.9 | 7.five | five.three | 4.five | 60 | twenty | 14.21 | eighteen.fifty three |
ZTL15 | 24 | 3 | nine.five | 34 | 26 | 26 | 39.2 | 58.2 | M4x5 | fifteen | 14.9 | seven.5 | 5.three | four.5 | 60 | twenty | 7.eighty two | nine.64 |
ZTH20 | 30 | 3.7 | twelve | forty four | 32 | 36 | 52.five | 74.5 | M5x6 | 20 | 20 | 9.five | eight.five | six | sixty | twenty | 24.23 | 31.28 |
ZTL20 | 28 | three.7 | 12 | 44 | 32 | 32 | fifty two.five | seventy four.5 | M5x6 | twenty | 20 | nine.five | 8.5 | six | 60 | twenty | 12.eighty four | sixteen.fifty eight |
ZTH25 | 40 | four.five | 12.five | 48 | 35 | 35 | sixty one | 85 | M6x8 | 23 | 23 | eleven | nine | seven | 60 | twenty | 35.24 | 44.31 |
ZTL25 | 33 | four.five | twelve.five | forty eight | 35 | 35 | 61 | eighty five | M6x8 | 23 | 23 | 11 | 9 | seven | sixty | twenty | 19.38 | 23.04 |
ZTH30 | forty five | 7 | sixteen | sixty | forty | forty | 69 | 97 | M8x10 | 28 | 28.four | 14 | 12 | nine | eighty | twenty | forty six.53 | fifty six.24 |
ZTL30 | 42 | 7 | sixteen | sixty | 40 | 40 | 69 | 97 | M8x10 | 28 | 28.four | 14 | twelve | 9 | 80 | 20 | 27.ninety two | 33.seventy four |
ZTH35 | fifty five | seven.6 | 18 | 70 | 50 | fifty | 79 | 109 | M8x12 | 34 | 31.nine | 14 | 12 | nine | 80 | 20 | sixty one.22 | eighty.three |
ZTL35 | forty eight | 7.six | 18 | 70 | fifty | fifty | seventy nine | 109 | M8x12 | 34 | 31.nine | 14 | twelve | nine | eighty | 20 | 39.79 | fifty two.2 |
3.2. ZTW Higher Rigidity
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block(mm) | Dimensions of Rail(mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | Lone | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C (KN) | |
ZTW15 | 24 | three | 16 | forty seven | 38 | 30 | 39.two | 58.2 | M5 | fifteen | fourteen.9 | 7.5 | five.3 | four.5 | 60 | 20 | 14.23 | 18.35 |
ZTW20 | 30 | 3.seven | 22 | 63 | 53 | forty | 52.five | seventy four.5 | M6 | twenty | 20 | nine.5 | eight.five | 6 | 60 | 20 | 23.ninety six | 30.87 |
ZTW25 | 36 | 4.five | 23.five | 70 | fifty seven | 45 | 61 | eighty five | M8 | 23 | 23 | eleven | 9 | 7 | 60 | 20 | 35.33 | 44.34 |
ZTW30 | 42 | seven | 31 | ninety | seventy two | fifty two | 69 | 97 | M10 | 28 | 28.4 | 14 | 12 | 9 | 80 | twenty | 46.25 | 55.ninety one |
ZTW35 | 48 | seven.six | 33 | one hundred | eighty two | sixty two | 79 | 109 | M10 | 34 | 31.9 | 14 | 12 | nine | 80 | twenty | sixty one.32 | eighty.fifty seven |
three.3. ZQH/ZQL Higher Dust Safety
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block (mm) | Dimensions of Rail (mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C (KN) | |
ZQH35 | 55 | 7.five | eighteen | 70 | 50 | 50 | 79 | 111.two | M8x12 | 34 | 29 | 14 | 12 | nine | 80 | 20 | 62.3 | 140.one |
ZQL35 | forty eight | seven.5 | eighteen | 70 | fifty | fifty | 79 | 111.2 | M8x12 | 34 | 29 | 14 | twelve | 9 | 80 | twenty | 45.forty eight | 102.27 |
ZQH45 | 70 | nine.5 | 20.5 | 86 | sixty | sixty | ninety seven | 134 | M10x17 | forty five | 38 | twenty | 17 | 14 | a hundred and five | 22.5 | 79.five | 158.31 |
ZQL45 | sixty | nine.5 | twenty.5 | 86 | sixty | sixty | ninety seven | 134 | M10x17 | forty five | 38 | twenty | 17 | 14 | one zero five | 22.five | 58.04 | a hundred and fifteen.57 |
ZQH55 | eighty | 13 | 23.five | a hundred | 75 | 75 | 117.seven | 161.7 | M12x18 | 53 | 44 | 23 | 20 | sixteen | a hundred and twenty | thirty | 118.52 | 228.sixty two |
ZQL55 | 70 | 13 | 23.5 | 100 | 75 | seventy five | 117.7 | 161.7 | M12x18 | 53 | forty four | 23 | twenty | sixteen | a hundred and twenty | thirty | 86.52 | 166.89 |
3.4. ZQW Large Dust Security
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block (mm) | Dimensions of Rail (mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | Lone | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C (KN) | |
ZQW35 | 48 | 7.5 | 33 | 100 | 82 | 62 | seventy nine | 111.2 | M10 | 34 | 29 | fourteen | 12 | nine | eighty | 20 | 74.32 | ninety six.35 |
ZQW45 | 60 | 9.5 | 37.five | a hundred and twenty | a hundred | eighty | ninety seven | 134 | M12 | forty five | 38 | twenty | 17 | 14 | one hundred and five | 22.five | 104.seventy two | 210.51 |
ZQW55 | 70 | 13 | forty three.5 | one hundred forty | 116 | ninety five | 117.seven | 161.seven | M14 | fifty three | 44 | 23 | 20 | sixteen | a hundred and twenty | 30 | 154.forty nine | 307.54 |
four. Dimensions for SGC HG & EG Sequence
four.1 HGH-CA / HGH-HA
Design No. | Proportions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | ||||||||||||||||
H | Hone | N | W | B | B1 | C | L1 | L | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
HGH 15CA | 28 | four.three | nine.5 | 34 | 26 | four | 26 | 39.4 | sixty one.4 | 5.three | M4x5 | six | 15 | fifteen | 7.five | five.three | four.5 | 60 | twenty | M4x16 |
HGH 20CA | 30 | 4.6 | 12 | 44 | 32 | 6 | 36 | fifty.five | seventy seven.5 | 12 | M5x6 | 8 | 20 | 17.five | 9.5 | 8.five | 6 | 60 | 20 | M5x16 |
HGH 20HA | fifty | 65.2 | ninety two.2 | |||||||||||||||||
HGH 25CA | 40 | 5.5 | 12.5 | 48 | 35 | 6.5 | 35 | 58 | eighty four | 12 | M6x8 | 8 | 23 | 22 | 11 | 9 | 7 | 60 | 20 | M6x20 |
HGH 25HA | 50 | 78.six | 104.6 | |||||||||||||||||
HGH 30CA | 45 | 6 | 16 | 60 | 40 | 10 | 40 | 70 | 97.four | 12 | M8x10 | 8.five | 28 | 26 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGH 30HA | sixty | ninety three | 120.4 | |||||||||||||||||
HGH 35CA | 55 | 7.5 | 18 | 70 | 50 | 10 | fifty | 80 | 112.4 | 12 | M8x12 | 10.2 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGH 35HA | 72 | one hundred and five.eight | 138.2 | |||||||||||||||||
HGH 45CA | 70 | 9.five | 20.5 | 86 | 60 | 13 | 60 | 97 | 139.4 | 12.9 | M10x17 | 16 | 45 | 38 | 20 | 17 | 14 | 105 | 22.five | M12x35 |
HGH 45HA | eighty | 128.8 | 171.two | |||||||||||||||||
HGH 55CA | 80 | 13 | 23.5 | 100 | 75 | 12.5 | seventy five | 117.seven | 166.7 | 12.9 | M12x18 | 17.five | 53 | 44 | 23 | 20 | 16 | 120 | 30 | M14x45 |
HGH 55HA | 95 | 155.8 | 204.eight | |||||||||||||||||
HGH 65CA | 90 | fifteen | 31.five | 126 | seventy six | 25 | 70 | a hundred and forty four.two | 200.two | 12.9 | M16x20 | 25 | 63 | fifty three | 26 | 22 | eighteen | 150 | 35 | M16x50 |
four.2. HGW-CA / HGW-HA
Product No. | Proportions of Assembly(mm) | Proportions of Block (mm) | Dimensions of Rail (mm) | Mounting bolt | ||||||||||||||||
H | Hone | N | W | B | B1 | C | Lone | L | G | M | T | WR | HR | D | h | d | P | E | (mm) | |
HGW 15CA | 24 | four.three | sixteen | forty seven | 38 | 4.five | thirty | 39.4 | 61.4 | 5.three | M5 | six | fifteen | 15 | 7.five | five.3 | four.5 | sixty | 20 | M4x16 |
HGW 20CA | 30 | 4.6 | 21.five | 63 | 53 | 5 | 40 | 50.five | 77.five | 12 | M6 | 8 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
HGW 20HA | sixty five.2 | ninety two.two | ||||||||||||||||||
HGW 25CA | 36 | 5.five | 23.five | 70 | 57 | 6.5 | 45 | 58 | eighty four | 12 | M8 | 8 | 23 | 22 | 11 | 9 | 7 | 60 | 20 | M6x20 |
HGW 25HA | 78.6 | 104.six | ||||||||||||||||||
HGW 30CA | 42 | 6 | 31 | 90 | 72 | 9 | 52 | 70 | ninety seven.4 | 12 | M10 | 8.5 | 28 | 26 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGW 30HA | 93 | 120.four | ||||||||||||||||||
HGW 35CA | 48 | 7.5 | 33 | 100 | 82 | 9 | 62 | 80 | 112.four | 12 | M10 | 10.one | 34 | 29 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGW 35HA | one zero five.eight | 138.two | ||||||||||||||||||
HGW 45CA | 60 | 9.five | 37.five | 120 | 100 | 10 | 80 | ninety seven | 139.four | 12.nine | M12 | 15.one | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | M12x35 |
HGW 45HA | 128.8 | 171.two | ||||||||||||||||||
HGW 55CA | 70 | 13 | 43.five | 140 | 116 | 12 | 95 | 117.7 | 166.seven | 12.nine | M14 | 17.5 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | M14x45 |
HGW 55HA | a hundred and fifty five.8 | 204.8 | ||||||||||||||||||
HGW 65CA | ninety | fifteen | 53.five | 170 | 142 | 14 | 110 | one hundred forty four.2 | 200.two | twelve.9 | M16 | 25 | 63 | 53 | 26 | 22 | 18 | a hundred and fifty | 35 | M16x50 |
four.3. EGH-SA / EGH-CA
Product No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | |||||||||||||||||
H | H1 | N | W | B | Bone | C | L1 | L | K1 | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
EGH15SA | 24 | 4.five | 9.5 | 34 | 26 | 4 | – | 23.one | 40.one | 14.eight | 5.seven | M4x6 | 6 | 15 | 12.five | 6 | 4.five | 3.5 | 60 | 20 | M4x16 |
EGH15CA | 26 | 39.8 | 56.eight | ten.fifteen | |||||||||||||||||
EGH20SA | 28 | 6 | 11 | 42 | 32 | 5 | – | 29 | fifty | eighteen.seventy five | 12 | M5x7 | 7.five | 20 | 15.five | 9.five | 8.5 | 6 | 60 | 20 | M5x16 |
EGH20CA | 32 | 48.1 | 69.one | twelve.3 | |||||||||||||||||
EGH25SA | 33 | 7 | 12.five | 48 | 35 | 6.five | – | 35.5 | fifty nine.1 | 21.9 | 12 | M6x9 | 8 | 23 | 18 | 11 | 9 | 7 | 60 | 20 | M6x20 |
EGH25CA | 35 | 59 | eighty two.6 | 16.15 | |||||||||||||||||
EGH30SA | forty two | ten | 16 | sixty | 40 | ten | – | 41.5 | sixty nine.5 | 26.seventy five | 12 | M8x12 | 9 | 28 | 23 | 11 | nine | 7 | eighty | 20 | M6x25 |
four.4. EGW-SA / EGW-CA
Product No. | Proportions of Assembly(mm) | Dimensions of Block (mm) | Proportions of Rail (mm) | Mounting Bolt | |||||||||||||||||
H | H1 | N | W | B | B1 | C | Lone | L | Kone | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
EGW 15SA | 24 | 4.5 | 18.5 | 52 | 41 | 5.5 | – | 23.one | 40.one | 14.8 | 5.7 | M5 | 5 | 15 | 12.5 | 6 | 4.5 | 3.5 | 60 | 20 | M4x16 |
EGW 15CA | 26 | 39.8 | 56.8 | 10.15 | |||||||||||||||||
EGW 20SA | 28 | 6 | 19.five | 59 | 49 | 5 | – | 29 | 50 | 18.75 | 12 | M6 | 7 | 20 | 15.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
EGW 20CA | 32 | forty eight.1 | 69.1 | twelve.three | |||||||||||||||||
EGW 25SA | 33 | 7 | 25 | 73 | 60 | 6.5 | – | 35.five | 59.1 | 21.nine | 12 | M8 | 7.5 | 23 | 18 | 11 | 9 | 7 | 60 | 20 | M6x20 |
EGW 25CA | 35 | 59 | 82.six | sixteen.fifteen | |||||||||||||||||
EGW 30SA | 42 | 10 | 31 | 90 | 72 | 9 | – | forty one.five | 69.5 | 26.seventy five | 12 | M10 | 7 | 28 | 23 | 11 | 9 | 7 | 80 | twenty | M6x25 |
5. Purposes:
5.1. ZT Sequence- CNC machining centres, Heavy duty slicing machines, CNC grinding equipment, Injection molding machines, Electric discharge equipment, Wire reducing devices, Plano millers.
five.2. ZQ Series- Precision measure equipments, Semiconductor equipments, Automatic equipments, Laser marking devices, and in higher-tech market necessary substantial speed, low sound, low dust era.
five.3. HG Sequence- Grinding, Milling, and drilling devices, lathe, device centre.
five.4. EG Series- Automatic equipments, Substantial pace transfer device, Semiconductor equipments, Wooden cutting equipment, Precision evaluate equipments.
Q1: Can I get a free sample?
A1: We offer samples free in freight gathered. For unique samples need, you should speak to us for far more specifics.
Q2: How could I pay?
A2: We desire T/T or L/C at sight. If you favor other payment terms, remember to make contact with us freely.
Q3: What is your brand name and packing way? Can you make my brand and packing?
A3: Our manufacturer is SGC and our very own packing components. We can make your brand name. For more particulars, make sure you speak to us.
Q4: What is the delivery lead time?
A4: It is dependent on the purchase portions. The mass generation direct time is about forty five-sixty days soon after receipt of the deposit.
Q5: Are you company or investing business?
A5: We are producer and exporter. We give all sorts of OEM providers for clientele close to the entire world.
Q6: The place is your principal market?
A6: We export to the North The usa, Mexico, Australia, South-east Asia, Europe, U.A.E., Turkey, and other nations around the world.
Our Companies
1. Professional QC and QA group to make sure all products qualified just before shipping.
two. Competitive value.
3 .Normal package deal to ensure the safe transportation.
4. Professional support.
Why select us?
1. Creation
Certified generation, competitive price, skilled service.
2. Top quality
All goods are inspected one hundred% prior to shipment by relative tests equipments.
To Be Negotiated | 5 Sets (Min. Order) |
###
Material: | Aluminium |
---|---|
Structure: | Hook Crane |
Installation: | All-Terrain Crane |
Driven Type: | Hydraulic |
Carrying Capacity: | Middle-Level |
Running Mode: | Moving |
###
Samples: |
US$ 10/Set
1 Set(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Series | Size | Types | Features | |||||
H (Square) |
L (Square) |
W (Flange) |
High Torque | Scraper | High Dust Protect | Low Noise | ||
Heavy Load & Quieter | 15 Series | ○ | ○ | ○ | ○ | |||
20 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
25 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
30 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
35 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
Quieter | 35 Series | ○ | ○ | ○ | ○ | |||
45 Series | ○ | ○ | ○ | ○ | ||||
55 Series | ○ | ○ | ○ | ○ | ||||
General | 15 Series | ○ | ○ | ○ | ||||
20 Series | ○ | ○ | ○ | |||||
25 Series | ○ | ○ | ○ | |||||
30 Series | ○ | ○ | ○ |
###
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block(mm) | Dimensions of Rail(mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
ZTH15 | 28 | 3 | 9.5 | 34 | 26 | 26 | 39.2 | 58.2 | M4x5 | 15 | 14.9 | 7.5 | 5.3 | 4.5 | 60 | 20 | 14.21 | 18.53 |
ZTL15 | 24 | 3 | 9.5 | 34 | 26 | 26 | 39.2 | 58.2 | M4x5 | 15 | 14.9 | 7.5 | 5.3 | 4.5 | 60 | 20 | 7.82 | 9.64 |
ZTH20 | 30 | 3.7 | 12 | 44 | 32 | 36 | 52.5 | 74.5 | M5x6 | 20 | 20 | 9.5 | 8.5 | 6 | 60 | 20 | 24.23 | 31.28 |
ZTL20 | 28 | 3.7 | 12 | 44 | 32 | 32 | 52.5 | 74.5 | M5x6 | 20 | 20 | 9.5 | 8.5 | 6 | 60 | 20 | 12.84 | 16.58 |
ZTH25 | 40 | 4.5 | 12.5 | 48 | 35 | 35 | 61 | 85 | M6x8 | 23 | 23 | 11 | 9 | 7 | 60 | 20 | 35.24 | 44.31 |
ZTL25 | 33 | 4.5 | 12.5 | 48 | 35 | 35 | 61 | 85 | M6x8 | 23 | 23 | 11 | 9 | 7 | 60 | 20 | 19.38 | 23.04 |
ZTH30 | 45 | 7 | 16 | 60 | 40 | 40 | 69 | 97 | M8x10 | 28 | 28.4 | 14 | 12 | 9 | 80 | 20 | 46.53 | 56.24 |
ZTL30 | 42 | 7 | 16 | 60 | 40 | 40 | 69 | 97 | M8x10 | 28 | 28.4 | 14 | 12 | 9 | 80 | 20 | 27.92 | 33.74 |
ZTH35 | 55 | 7.6 | 18 | 70 | 50 | 50 | 79 | 109 | M8x12 | 34 | 31.9 | 14 | 12 | 9 | 80 | 20 | 61.22 | 80.3 |
ZTL35 | 48 | 7.6 | 18 | 70 | 50 | 50 | 79 | 109 | M8x12 | 34 | 31.9 | 14 | 12 | 9 | 80 | 20 | 39.79 | 52.2 |
###
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block(mm) | Dimensions of Rail(mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
ZTW15 | 24 | 3 | 16 | 47 | 38 | 30 | 39.2 | 58.2 | M5 | 15 | 14.9 | 7.5 | 5.3 | 4.5 | 60 | 20 | 14.23 | 18.35 |
ZTW20 | 30 | 3.7 | 22 | 63 | 53 | 40 | 52.5 | 74.5 | M6 | 20 | 20 | 9.5 | 8.5 | 6 | 60 | 20 | 23.96 | 30.87 |
ZTW25 | 36 | 4.5 | 23.5 | 70 | 57 | 45 | 61 | 85 | M8 | 23 | 23 | 11 | 9 | 7 | 60 | 20 | 35.33 | 44.34 |
ZTW30 | 42 | 7 | 31 | 90 | 72 | 52 | 69 | 97 | M10 | 28 | 28.4 | 14 | 12 | 9 | 80 | 20 | 46.25 | 55.91 |
ZTW35 | 48 | 7.6 | 33 | 100 | 82 | 62 | 79 | 109 | M10 | 34 | 31.9 | 14 | 12 | 9 | 80 | 20 | 61.32 | 80.57 |
###
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block (mm) | Dimensions of Rail (mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
ZQH35 | 55 | 7.5 | 18 | 70 | 50 | 50 | 79 | 111.2 | M8x12 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | 62.3 | 140.1 |
ZQL35 | 48 | 7.5 | 18 | 70 | 50 | 50 | 79 | 111.2 | M8x12 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | 45.48 | 102.27 |
ZQH45 | 70 | 9.5 | 20.5 | 86 | 60 | 60 | 97 | 134 | M10x17 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | 79.5 | 158.31 |
ZQL45 | 60 | 9.5 | 20.5 | 86 | 60 | 60 | 97 | 134 | M10x17 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | 58.04 | 115.57 |
ZQH55 | 80 | 13 | 23.5 | 100 | 75 | 75 | 117.7 | 161.7 | M12x18 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | 118.52 | 228.62 |
ZQL55 | 70 | 13 | 23.5 | 100 | 75 | 75 | 117.7 | 161.7 | M12x18 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | 86.52 | 166.89 |
###
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block (mm) | Dimensions of Rail (mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
ZQW35 | 48 | 7.5 | 33 | 100 | 82 | 62 | 79 | 111.2 | M10 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | 74.32 | 96.35 |
ZQW45 | 60 | 9.5 | 37.5 | 120 | 100 | 80 | 97 | 134 | M12 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | 104.72 | 210.51 |
ZQW55 | 70 | 13 | 43.5 | 140 | 116 | 95 | 117.7 | 161.7 | M14 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | 154.49 | 307.54 |
###
Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | ||||||||||||||||
H | H1 | N | W | B | B1 | C | L1 | L | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
HGH 15CA | 28 | 4.3 | 9.5 | 34 | 26 | 4 | 26 | 39.4 | 61.4 | 5.3 | M4x5 | 6 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 20 | M4x16 |
HGH 20CA | 30 | 4.6 | 12 | 44 | 32 | 6 | 36 | 50.5 | 77.5 | 12 | M5x6 | 8 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
HGH 20HA | 50 | 65.2 | 92.2 | |||||||||||||||||
HGH 25CA | 40 | 5.5 | 12.5 | 48 | 35 | 6.5 | 35 | 58 | 84 | 12 | M6x8 | 8 | 23 | 22 | 11 | 9 | 7 | 60 | 20 | M6x20 |
HGH 25HA | 50 | 78.6 | 104.6 | |||||||||||||||||
HGH 30CA | 45 | 6 | 16 | 60 | 40 | 10 | 40 | 70 | 97.4 | 12 | M8x10 | 8.5 | 28 | 26 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGH 30HA | 60 | 93 | 120.4 | |||||||||||||||||
HGH 35CA | 55 | 7.5 | 18 | 70 | 50 | 10 | 50 | 80 | 112.4 | 12 | M8x12 | 10.2 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGH 35HA | 72 | 105.8 | 138.2 | |||||||||||||||||
HGH 45CA | 70 | 9.5 | 20.5 | 86 | 60 | 13 | 60 | 97 | 139.4 | 12.9 | M10x17 | 16 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | M12x35 |
HGH 45HA | 80 | 128.8 | 171.2 | |||||||||||||||||
HGH 55CA | 80 | 13 | 23.5 | 100 | 75 | 12.5 | 75 | 117.7 | 166.7 | 12.9 | M12x18 | 17.5 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | M14x45 |
HGH 55HA | 95 | 155.8 | 204.8 | |||||||||||||||||
HGH 65CA | 90 | 15 | 31.5 | 126 | 76 | 25 | 70 | 144.2 | 200.2 | 12.9 | M16x20 | 25 | 63 | 53 | 26 | 22 | 18 | 150 | 35 | M16x50 |
###
Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting bolt | ||||||||||||||||
H | H1 | N | W | B | B1 | C | L1 | L | G | M | T | WR | HR | D | h | d | P | E | (mm) | |
HGW 15CA | 24 | 4.3 | 16 | 47 | 38 | 4.5 | 30 | 39.4 | 61.4 | 5.3 | M5 | 6 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 20 | M4x16 |
HGW 20CA | 30 | 4.6 | 21.5 | 63 | 53 | 5 | 40 | 50.5 | 77.5 | 12 | M6 | 8 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
HGW 20HA | 65.2 | 92.2 | ||||||||||||||||||
HGW 25CA | 36 | 5.5 | 23.5 | 70 | 57 | 6.5 | 45 | 58 | 84 | 12 | M8 | 8 | 23 | 22 | 11 | 9 | 7 | 60 | 20 | M6x20 |
HGW 25HA | 78.6 | 104.6 | ||||||||||||||||||
HGW 30CA | 42 | 6 | 31 | 90 | 72 | 9 | 52 | 70 | 97.4 | 12 | M10 | 8.5 | 28 | 26 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGW 30HA | 93 | 120.4 | ||||||||||||||||||
HGW 35CA | 48 | 7.5 | 33 | 100 | 82 | 9 | 62 | 80 | 112.4 | 12 | M10 | 10.1 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGW 35HA | 105.8 | 138.2 | ||||||||||||||||||
HGW 45CA | 60 | 9.5 | 37.5 | 120 | 100 | 10 | 80 | 97 | 139.4 | 12.9 | M12 | 15.1 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | M12x35 |
HGW 45HA | 128.8 | 171.2 | ||||||||||||||||||
HGW 55CA | 70 | 13 | 43.5 | 140 | 116 | 12 | 95 | 117.7 | 166.7 | 12.9 | M14 | 17.5 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | M14x45 |
HGW 55HA | 155.8 | 204.8 | ||||||||||||||||||
HGW 65CA | 90 | 15 | 53.5 | 170 | 142 | 14 | 110 | 144.2 | 200.2 | 12.9 | M16 | 25 | 63 | 53 | 26 | 22 | 18 | 150 | 35 | M16x50 |
###
Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | |||||||||||||||||
H | H1 | N | W | B | B1 | C | L1 | L | K1 | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
EGH15SA | 24 | 4.5 | 9.5 | 34 | 26 | 4 | – | 23.1 | 40.1 | 14.8 | 5.7 | M4x6 | 6 | 15 | 12.5 | 6 | 4.5 | 3.5 | 60 | 20 | M4x16 |
EGH15CA | 26 | 39.8 | 56.8 | 10.15 | |||||||||||||||||
EGH20SA | 28 | 6 | 11 | 42 | 32 | 5 | – | 29 | 50 | 18.75 | 12 | M5x7 | 7.5 | 20 | 15.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
EGH20CA | 32 | 48.1 | 69.1 | 12.3 | |||||||||||||||||
EGH25SA | 33 | 7 | 12.5 | 48 | 35 | 6.5 | – | 35.5 | 59.1 | 21.9 | 12 | M6x9 | 8 | 23 | 18 | 11 | 9 | 7 | 60 | 20 | M6x20 |
EGH25CA | 35 | 59 | 82.6 | 16.15 | |||||||||||||||||
EGH30SA | 42 | 10 | 16 | 60 | 40 | 10 | – | 41.5 | 69.5 | 26.75 | 12 | M8x12 | 9 | 28 | 23 | 11 | 9 | 7 | 80 | 20 | M6x25 |
###
Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | |||||||||||||||||
H | H1 | N | W | B | B1 | C | L1 | L | K1 | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
EGW 15SA | 24 | 4.5 | 18.5 | 52 | 41 | 5.5 | – | 23.1 | 40.1 | 14.8 | 5.7 | M5 | 5 | 15 | 12.5 | 6 | 4.5 | 3.5 | 60 | 20 | M4x16 |
EGW 15CA | 26 | 39.8 | 56.8 | 10.15 | |||||||||||||||||
EGW 20SA | 28 | 6 | 19.5 | 59 | 49 | 5 | – | 29 | 50 | 18.75 | 12 | M6 | 7 | 20 | 15.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
EGW 20CA | 32 | 48.1 | 69.1 | 12.3 | |||||||||||||||||
EGW 25SA | 33 | 7 | 25 | 73 | 60 | 6.5 | – | 35.5 | 59.1 | 21.9 | 12 | M8 | 7.5 | 23 | 18 | 11 | 9 | 7 | 60 | 20 | M6x20 |
EGW 25CA | 35 | 59 | 82.6 | 16.15 | |||||||||||||||||
EGW 30SA | 42 | 10 | 31 | 90 | 72 | 9 | – | 41.5 | 69.5 | 26.75 | 12 | M10 | 7 | 28 | 23 | 11 | 9 | 7 | 80 | 20 | M6x25 |
To Be Negotiated | 5 Sets (Min. Order) |
###
Material: | Aluminium |
---|---|
Structure: | Hook Crane |
Installation: | All-Terrain Crane |
Driven Type: | Hydraulic |
Carrying Capacity: | Middle-Level |
Running Mode: | Moving |
###
Samples: |
US$ 10/Set
1 Set(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Series | Size | Types | Features | |||||
H (Square) |
L (Square) |
W (Flange) |
High Torque | Scraper | High Dust Protect | Low Noise | ||
Heavy Load & Quieter | 15 Series | ○ | ○ | ○ | ○ | |||
20 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
25 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
30 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
35 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
Quieter | 35 Series | ○ | ○ | ○ | ○ | |||
45 Series | ○ | ○ | ○ | ○ | ||||
55 Series | ○ | ○ | ○ | ○ | ||||
General | 15 Series | ○ | ○ | ○ | ||||
20 Series | ○ | ○ | ○ | |||||
25 Series | ○ | ○ | ○ | |||||
30 Series | ○ | ○ | ○ |
###
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block(mm) | Dimensions of Rail(mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
ZTH15 | 28 | 3 | 9.5 | 34 | 26 | 26 | 39.2 | 58.2 | M4x5 | 15 | 14.9 | 7.5 | 5.3 | 4.5 | 60 | 20 | 14.21 | 18.53 |
ZTL15 | 24 | 3 | 9.5 | 34 | 26 | 26 | 39.2 | 58.2 | M4x5 | 15 | 14.9 | 7.5 | 5.3 | 4.5 | 60 | 20 | 7.82 | 9.64 |
ZTH20 | 30 | 3.7 | 12 | 44 | 32 | 36 | 52.5 | 74.5 | M5x6 | 20 | 20 | 9.5 | 8.5 | 6 | 60 | 20 | 24.23 | 31.28 |
ZTL20 | 28 | 3.7 | 12 | 44 | 32 | 32 | 52.5 | 74.5 | M5x6 | 20 | 20 | 9.5 | 8.5 | 6 | 60 | 20 | 12.84 | 16.58 |
ZTH25 | 40 | 4.5 | 12.5 | 48 | 35 | 35 | 61 | 85 | M6x8 | 23 | 23 | 11 | 9 | 7 | 60 | 20 | 35.24 | 44.31 |
ZTL25 | 33 | 4.5 | 12.5 | 48 | 35 | 35 | 61 | 85 | M6x8 | 23 | 23 | 11 | 9 | 7 | 60 | 20 | 19.38 | 23.04 |
ZTH30 | 45 | 7 | 16 | 60 | 40 | 40 | 69 | 97 | M8x10 | 28 | 28.4 | 14 | 12 | 9 | 80 | 20 | 46.53 | 56.24 |
ZTL30 | 42 | 7 | 16 | 60 | 40 | 40 | 69 | 97 | M8x10 | 28 | 28.4 | 14 | 12 | 9 | 80 | 20 | 27.92 | 33.74 |
ZTH35 | 55 | 7.6 | 18 | 70 | 50 | 50 | 79 | 109 | M8x12 | 34 | 31.9 | 14 | 12 | 9 | 80 | 20 | 61.22 | 80.3 |
ZTL35 | 48 | 7.6 | 18 | 70 | 50 | 50 | 79 | 109 | M8x12 | 34 | 31.9 | 14 | 12 | 9 | 80 | 20 | 39.79 | 52.2 |
###
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block(mm) | Dimensions of Rail(mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
ZTW15 | 24 | 3 | 16 | 47 | 38 | 30 | 39.2 | 58.2 | M5 | 15 | 14.9 | 7.5 | 5.3 | 4.5 | 60 | 20 | 14.23 | 18.35 |
ZTW20 | 30 | 3.7 | 22 | 63 | 53 | 40 | 52.5 | 74.5 | M6 | 20 | 20 | 9.5 | 8.5 | 6 | 60 | 20 | 23.96 | 30.87 |
ZTW25 | 36 | 4.5 | 23.5 | 70 | 57 | 45 | 61 | 85 | M8 | 23 | 23 | 11 | 9 | 7 | 60 | 20 | 35.33 | 44.34 |
ZTW30 | 42 | 7 | 31 | 90 | 72 | 52 | 69 | 97 | M10 | 28 | 28.4 | 14 | 12 | 9 | 80 | 20 | 46.25 | 55.91 |
ZTW35 | 48 | 7.6 | 33 | 100 | 82 | 62 | 79 | 109 | M10 | 34 | 31.9 | 14 | 12 | 9 | 80 | 20 | 61.32 | 80.57 |
###
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block (mm) | Dimensions of Rail (mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
ZQH35 | 55 | 7.5 | 18 | 70 | 50 | 50 | 79 | 111.2 | M8x12 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | 62.3 | 140.1 |
ZQL35 | 48 | 7.5 | 18 | 70 | 50 | 50 | 79 | 111.2 | M8x12 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | 45.48 | 102.27 |
ZQH45 | 70 | 9.5 | 20.5 | 86 | 60 | 60 | 97 | 134 | M10x17 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | 79.5 | 158.31 |
ZQL45 | 60 | 9.5 | 20.5 | 86 | 60 | 60 | 97 | 134 | M10x17 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | 58.04 | 115.57 |
ZQH55 | 80 | 13 | 23.5 | 100 | 75 | 75 | 117.7 | 161.7 | M12x18 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | 118.52 | 228.62 |
ZQL55 | 70 | 13 | 23.5 | 100 | 75 | 75 | 117.7 | 161.7 | M12x18 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | 86.52 | 166.89 |
###
Model No. | Dimensions of Assembly (mm) |
Dimensions of Block (mm) | Dimensions of Rail (mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
ZQW35 | 48 | 7.5 | 33 | 100 | 82 | 62 | 79 | 111.2 | M10 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | 74.32 | 96.35 |
ZQW45 | 60 | 9.5 | 37.5 | 120 | 100 | 80 | 97 | 134 | M12 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | 104.72 | 210.51 |
ZQW55 | 70 | 13 | 43.5 | 140 | 116 | 95 | 117.7 | 161.7 | M14 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | 154.49 | 307.54 |
###
Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | ||||||||||||||||
H | H1 | N | W | B | B1 | C | L1 | L | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
HGH 15CA | 28 | 4.3 | 9.5 | 34 | 26 | 4 | 26 | 39.4 | 61.4 | 5.3 | M4x5 | 6 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 20 | M4x16 |
HGH 20CA | 30 | 4.6 | 12 | 44 | 32 | 6 | 36 | 50.5 | 77.5 | 12 | M5x6 | 8 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
HGH 20HA | 50 | 65.2 | 92.2 | |||||||||||||||||
HGH 25CA | 40 | 5.5 | 12.5 | 48 | 35 | 6.5 | 35 | 58 | 84 | 12 | M6x8 | 8 | 23 | 22 | 11 | 9 | 7 | 60 | 20 | M6x20 |
HGH 25HA | 50 | 78.6 | 104.6 | |||||||||||||||||
HGH 30CA | 45 | 6 | 16 | 60 | 40 | 10 | 40 | 70 | 97.4 | 12 | M8x10 | 8.5 | 28 | 26 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGH 30HA | 60 | 93 | 120.4 | |||||||||||||||||
HGH 35CA | 55 | 7.5 | 18 | 70 | 50 | 10 | 50 | 80 | 112.4 | 12 | M8x12 | 10.2 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGH 35HA | 72 | 105.8 | 138.2 | |||||||||||||||||
HGH 45CA | 70 | 9.5 | 20.5 | 86 | 60 | 13 | 60 | 97 | 139.4 | 12.9 | M10x17 | 16 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | M12x35 |
HGH 45HA | 80 | 128.8 | 171.2 | |||||||||||||||||
HGH 55CA | 80 | 13 | 23.5 | 100 | 75 | 12.5 | 75 | 117.7 | 166.7 | 12.9 | M12x18 | 17.5 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | M14x45 |
HGH 55HA | 95 | 155.8 | 204.8 | |||||||||||||||||
HGH 65CA | 90 | 15 | 31.5 | 126 | 76 | 25 | 70 | 144.2 | 200.2 | 12.9 | M16x20 | 25 | 63 | 53 | 26 | 22 | 18 | 150 | 35 | M16x50 |
###
Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting bolt | ||||||||||||||||
H | H1 | N | W | B | B1 | C | L1 | L | G | M | T | WR | HR | D | h | d | P | E | (mm) | |
HGW 15CA | 24 | 4.3 | 16 | 47 | 38 | 4.5 | 30 | 39.4 | 61.4 | 5.3 | M5 | 6 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 20 | M4x16 |
HGW 20CA | 30 | 4.6 | 21.5 | 63 | 53 | 5 | 40 | 50.5 | 77.5 | 12 | M6 | 8 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
HGW 20HA | 65.2 | 92.2 | ||||||||||||||||||
HGW 25CA | 36 | 5.5 | 23.5 | 70 | 57 | 6.5 | 45 | 58 | 84 | 12 | M8 | 8 | 23 | 22 | 11 | 9 | 7 | 60 | 20 | M6x20 |
HGW 25HA | 78.6 | 104.6 | ||||||||||||||||||
HGW 30CA | 42 | 6 | 31 | 90 | 72 | 9 | 52 | 70 | 97.4 | 12 | M10 | 8.5 | 28 | 26 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGW 30HA | 93 | 120.4 | ||||||||||||||||||
HGW 35CA | 48 | 7.5 | 33 | 100 | 82 | 9 | 62 | 80 | 112.4 | 12 | M10 | 10.1 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | M8x25 |
HGW 35HA | 105.8 | 138.2 | ||||||||||||||||||
HGW 45CA | 60 | 9.5 | 37.5 | 120 | 100 | 10 | 80 | 97 | 139.4 | 12.9 | M12 | 15.1 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | M12x35 |
HGW 45HA | 128.8 | 171.2 | ||||||||||||||||||
HGW 55CA | 70 | 13 | 43.5 | 140 | 116 | 12 | 95 | 117.7 | 166.7 | 12.9 | M14 | 17.5 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | M14x45 |
HGW 55HA | 155.8 | 204.8 | ||||||||||||||||||
HGW 65CA | 90 | 15 | 53.5 | 170 | 142 | 14 | 110 | 144.2 | 200.2 | 12.9 | M16 | 25 | 63 | 53 | 26 | 22 | 18 | 150 | 35 | M16x50 |
###
Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | |||||||||||||||||
H | H1 | N | W | B | B1 | C | L1 | L | K1 | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
EGH15SA | 24 | 4.5 | 9.5 | 34 | 26 | 4 | – | 23.1 | 40.1 | 14.8 | 5.7 | M4x6 | 6 | 15 | 12.5 | 6 | 4.5 | 3.5 | 60 | 20 | M4x16 |
EGH15CA | 26 | 39.8 | 56.8 | 10.15 | |||||||||||||||||
EGH20SA | 28 | 6 | 11 | 42 | 32 | 5 | – | 29 | 50 | 18.75 | 12 | M5x7 | 7.5 | 20 | 15.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
EGH20CA | 32 | 48.1 | 69.1 | 12.3 | |||||||||||||||||
EGH25SA | 33 | 7 | 12.5 | 48 | 35 | 6.5 | – | 35.5 | 59.1 | 21.9 | 12 | M6x9 | 8 | 23 | 18 | 11 | 9 | 7 | 60 | 20 | M6x20 |
EGH25CA | 35 | 59 | 82.6 | 16.15 | |||||||||||||||||
EGH30SA | 42 | 10 | 16 | 60 | 40 | 10 | – | 41.5 | 69.5 | 26.75 | 12 | M8x12 | 9 | 28 | 23 | 11 | 9 | 7 | 80 | 20 | M6x25 |
###
Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | |||||||||||||||||
H | H1 | N | W | B | B1 | C | L1 | L | K1 | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
EGW 15SA | 24 | 4.5 | 18.5 | 52 | 41 | 5.5 | – | 23.1 | 40.1 | 14.8 | 5.7 | M5 | 5 | 15 | 12.5 | 6 | 4.5 | 3.5 | 60 | 20 | M4x16 |
EGW 15CA | 26 | 39.8 | 56.8 | 10.15 | |||||||||||||||||
EGW 20SA | 28 | 6 | 19.5 | 59 | 49 | 5 | – | 29 | 50 | 18.75 | 12 | M6 | 7 | 20 | 15.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
EGW 20CA | 32 | 48.1 | 69.1 | 12.3 | |||||||||||||||||
EGW 25SA | 33 | 7 | 25 | 73 | 60 | 6.5 | – | 35.5 | 59.1 | 21.9 | 12 | M8 | 7.5 | 23 | 18 | 11 | 9 | 7 | 60 | 20 | M6x20 |
EGW 25CA | 35 | 59 | 82.6 | 16.15 | |||||||||||||||||
EGW 30SA | 42 | 10 | 31 | 90 | 72 | 9 | – | 41.5 | 69.5 | 26.75 | 12 | M10 | 7 | 28 | 23 | 11 | 9 | 7 | 80 | 20 | M6x25 |
Applications and Maintenance of a Linear Rail
Whether you are looking to install a linear rail or you are looking for ways to maintain your existing one, there are some important factors to consider. In this article, you will learn about the applications for linear rails, the maintenance of a linear rail, and some of the common issues associated with linear guides.
Common issues with linear guides
Choosing the right linear guide can yield significant advantages in performance, cost and durability. However, it isn’t enough to just pick the right guide. To ensure maximum performance, you need to understand the components and technologies that go into the design. This article will highlight some of the most common problems associated with linear guides, and how to avoid them.
The most important thing to remember about a linear guide is that it is a component of a system. It should not be operated alone. If a linear guide fails, you’ll need to take steps to get it repaired.
A good way to gauge how well a guide will perform is to look at the load moments it carries while on a wall. This will tell you how much the guide can support over a full run of travel.
One of the most important things to consider is the type of mounting you use. It should match the precision of the guide unit. The mounting surface should be flat, and there should be no gaps or wiggles between the guide unit and the mounting surface.
The right kind of mounting will not only make installation easier, but will also ensure that your guide unit operates at its best. In addition, it can help prevent contamination from getting into the guide unit.
Another thing to consider is the quality of the lubricant. Linear guides are prone to corrosion, so it’s important to lubricate them regularly. You can do this by adding a high-quality lubricant that’s resistant to corrosive substances.
Using a linear guide with a good seal can help avoid corrosion. A good seal should have sealing lip that fits tightly around the ball guide profile. In addition, you should consider a thicker lubricant, such as calcium soap, as opposed to standard greases in wet environments.
Another thing to consider is how you can best align the guide unit. For example, you can use a high-speed end cap to reduce misalignment. This will reduce binding, as well as prevent a buildup of dirt and other debris between the guide unit and the mounting surface.
Common applications for linear rails
Across industrial applications, there are many uses for linear rails. Linear rails provide an extremely effective way of moving products and items through production processes. They offer excellent load capacity, low friction and high stiffness.
Linear rails can be manufactured in short or long lengths. These systems are ideal for moving loads from a few grams to thousands of kilograms. Depending on the specific application, the load capacity of the rail may vary.
Linear rails are commonly used in machine-tool applications and semiconductor manufacturing. Linear rails are also used for moving heavy equipment through factory floors. Linear rails are also used in advanced medical applications.
Linear rails can be used on a variety of surfaces. Depending on the type of application, the orientation of the rail may vary. This depends on the type of load and the amount of force being applied. It may also be influenced by the amount of dirt and dust.
Linear rails are designed to support loads from a few grams to thousands of kilograms. They are used in a variety of industries, including semiconductor manufacturing, packaging and medical devices. In many applications, linear rails are also used as the guide for actuators. Linear rails are a useful alternative to complex alignment operations.
Linear rails are often used in overhead transport systems. Linear rails are usually made of high strength steel and are profiled for maximum rigidity. They also have nickel-plating for corrosive environments.
Linear rails are often used in factory floors for heavy equipment, like moving robot arms. These systems can be used to move items around the factory floor or on high platforms above walkways. Linear rails are also used in the food and beverage industry. They are commonly used in weighing machines and CNC machines.
Linear rails are ideal for moving products with minimal friction. They also are used in semiconductor manufacturing, where the need for precision is crucial. Linear rails provide high load capacity and can accommodate travel speeds of up to five meters per second. Linear rails are also used in many transportation lines, including ice machines.
Cost of linear rails
Choosing the right linear rail can have a significant impact on the cost and performance of your system. Linear rails are used in all kinds of industries. They are highly effective when it comes to moving goods and equipment through the manufacturing process. They can be used vertically or horizontally. They are anchored to aluminum extrusion profiles for increased stiffness and accuracy.
The cost of linear rails can be justified by the advantages they offer. They provide high levels of rigidity and load capacity, making them a good option for moving products with minimal friction. Linear rails are also less likely to bend or vibrate. They also have a higher degree of precision and accuracy.
The price of linear rails is higher than those of linear rods. This is due to the fact that linear rails require more screws per unit length. They also require more support. If the rails are not supported, they will bend or rattle. The rails must be fully supported to achieve optimal precision.
Linear rails offer the most rigidity against gravity. They can support loads ranging from a few grams to several tons. They can also withstand moment and lift-off loads.
Rails can be installed using hex slot screws. They require more screws per unit length than rods. They also require accurate mounting surfaces. They can be installed by hand or with tools.
Linear rails are less likely to bend than rods, making them a better option for low precision applications. They are also cheaper.
However, they are not suitable for consumer applications. Rails are not as durable as rods and they are susceptible to bending and vibration. They are also subject to shipping oil and corrosion during transport and storage.
Linear rails cost around 2.5 to 4 times as much as linear rods. This is because they are more expensive to manufacture. They also require a more complex assembly process. They require hex slot screws along the length of the rail. It can be difficult to install.
The lifespan of linear rails is a frequently asked question among design engineers. It’s important to consider the factors that will reduce the lifespan.
Maintenance of linear rails
Whether you’re working with a linear rail system in an industrial environment or a consumer application, proper maintenance is critical. A well-maintained linear guide rail can withstand loads from a few grams to thousands of kilograms, providing a high degree of rigidity and load capacity.
The most important aspect of maintenance for a linear guide rail is lubrication. Proper lubrication reduces friction and wear, resulting in longer life for your guide rail. The amount of lubrication required depends on the environment in which it is being used and the frequency of use. Generally, a general purpose lubricant is adequate for low speed low load applications. However, when long lubrication cycles are required, a specialised bearing lubricant is necessary.
The components of a linear guide rail are comprised of rail, carriage, linear guide block and load supporting rollers. The rails and guide blocks are made of hardened steel or anodized aluminum. The carriage has two “wings” that align with the rail channel. The rollers are made of softer materials such as stainless steel. A lint-free paper towel can be used to clean the groove in the rail.
If a linear guide rail is used incorrectly, it can corrode. In order to maintain the integrity of the rail, it is important to clean it thoroughly. The lubrication mechanism is often accessed via a syringe, so cleaning the rail is relatively easy. Clean the rail with a shop towel, and then apply grease to the moving parts. This will smooth the motion of the ball screw guides and prolong the life of the linear slides.
If the linear guide is used incorrectly, it can cause excessive misalignment, indentations, and corrosion. It is recommended that the rail be cleaned and lubricated as needed.
The type of linear rail you choose will depend on the type of load it can handle. Aside from the load capacity, it is also important to consider the cost of maintenance. Typically, a linear rail system is more expensive than other systems, so you’ll want to make sure you get the right rail for the job.
editor by czh 2022-12-15