Worm gear screw jack

product detailed information:

The hardness test jack is an electric cylinder that provides the heavy thrust load required to place the samples to check the hardness of these sample materials. HiTork Engineering enhanced the actuator in the compact electric cylinder configuration to achieve higher loads.They can be further customized according to the application, including motors, hand cranks, limit switches and indicators.

extra information:

• Production capacity: 100 per month
• Packing details: We pack in high-quality wooden boxes.

product detailed information:

• CUBICAL model CWJ series.
• The CWJ series has 13 different sizes.
• The lifting capacity is 5 to 100 kN (CWJ).
• The drive motor speed is up to 1500 rpm.
• Worm gears have two different ratios, slow and fast.
• Top and bottom guide bushes for lifting screws.
• Worm gear hob for best blue contact.
• Oil or grease lubrication.
• Oil seals for worms and worm gears.
• All 6 faces have been processed.
• Easy to install the motor flange.
• Can be used in an upright or upside down position.

extra information:

• Project code: CWJ_20_TON
• delivery time: Discuss with each other

product detailed information:

Use side-mounted jacks
In the steel cold rolling mill.it is
Special design and
Developed for customers
According to their requirements.
These jacks can be installed
On the wall parallel to the screws
For vertical lifting and
Reduce application installation
Rolling machine jack
manufacturer.Jacks can
Horizontal installation for
Pull and push apps.
Usually the jack is either the base
Mounted on the shaft of the shaft
Or trunnion installation.

product detailed information:

• Classic model MWJ.
• 15 different sizes.
• Lifting capacity is 5kN to 1500kN.
• The drive motor speed is up to 1500 rpm.
• Self-locking trapezoidal screw.
• Worm gears have two ratios, nominal and slow.
• Top and bottom guide bushes for lifting screws.
• Worm gear hob for best blue contact.
• Fill with NLGI EP 1 or 2 grade grease.

extra information:

• Project code: Screw jack
• Production capacity: As required
• delivery time: 4-5 weeks
• Packing details: Packaging worthy of export

product detailed information:

MWJ & IMA Series-Classic

Worm gear screw jacks are used for lifting, lowering, lateral and swing applications.A variety of models and a wide range of lifting power help large end applications.

Classic: The footprint matches the German actuator model.

WJ series: Lifting weight: 5,10,20,25,50,100,150,200,250,300,350,500,750,1000,1500,2500,XNUMX. XNUMX. XNUMX, XNUMX kn.

We are dealing with the steel industry and the pipeline industry.

product detailed information:

• The housing is made of 25 grade closed grain cast iron
• The screw is made of Cr-Mo medium carbon steel and has high core strength after quenching and tempering.
• The nut is made of aluminum bronze and meets the British standard grade AB2

product detailed information:

• CUBICAL model MCJ series.
• 10 different sizes in MCJ.
• The lifting capacity in MCJ is 5 to 50 kN.
• The drive motor speed is up to 1500 rpm.
• Worm gears have two different ratios, slow and fast.
• Top and bottom guide bushes for lifting screws.
• Worm gear hob for best blue contact.
• Oil or grease lubrication.
• Oil seals for worms and worm gears.
• All 6 faces have been processed.
• Easy to install the motor flange.
• Can be used in an upright or upside down position.